• Output ranges from (2.2 lb/hr or 1 kg/hr) to (60,000 lb/hr or 30,000 kg/hr)
• Pellet sizes from Large (.060 - .250" or 1.2 - 10mm) to Small Micro (.010 - .050" or .25 - 1.1mm) depending on die, pelletizer model and resin
• Suitable for high output pelletizing, compounding, manufacture of color concentrate, scrap recovery, pilot operation, and research and development
• Able to process a wide range of polymers such as hot melt adhesives, thermoplastic rubber, polyester, nylon and other thermoplastics; especially for TPE, TPU, PA, PET, TPV, ABS, PP, PVC, Wax, Adhesives, Glass filled material, Carbon fiber filled compounds and 95% Metal filled compounds
• Patented and Patent applied - Anti-Freeze^TM Ceramic-Titanium die, Flex-Adjust^TM cutter hub, EZ-Flow^TM anti-turbulent water chamber, 4-Edge cutter blades, Polymer Hydraulic Diverter Valve and Water by pass system
• Available in either Automatic or Manual control configurations

CROWN Anti-Freeze^TM Ceramic-Titanium or Pure Ceramic Dies:

• Utilize advanced material technology for greater tolerances in operational temperature ranges without die-hole freeze off
• Allows hotter polymers to flow through the die, and colder water to impact the die cutting surface
• Longer die life

CROWN Flex-Adjust^TM Cutter Hub:

• Patent applied for Stainless steel layered disk with high torque capacity and 10 degree deflection at 360 degree
• Pneumatic - precision pressure control without rotary union or mechanical connections
• Provides the operator with precision blade-pressure control, which enables the ability to set and monitor the exact pressure of the cutting blades on the die face
• Programmable for various high melt flow materials: 200 MF Polypropylene, Nylon 6 and 66, Super Tacky Adhesive and Tacky Elastomers
• Programmable sharpening cycles

CROWN EZ-Flow^TM Anti-turbulent water chamber:

• Utilizes pressurized process water inlet and outlet design to provide laminar flow in the rotational direction of the cutter blades
• Eliminates random pellet impact within the chamber and against the holder and blades by decreasing turbulence within the water chamber
• Center block hub design prevents water flow at the die center

CROWN 4-Edge Cutter Blades:

• Super wear coatings and specialty steel doubles the wear life and in addition provides twice the cost efficiency of any other pelletizer blade on market

CROWN Polymer Hydraulic Diverter Valve:

• Incorporates low pressure drop internal design
• Utilizes a multi-step, high shear seal, which prevents polymer leakage and/or jamming of the piston due to contaminates
• Piston and valve constructed of a special alloy steel, which is through-hardened, nitrided and precision-ground to extremely tight tolerances
• Accumulator based hydraulics provide "instantaneous" opening and closing of the valve to one-tenth (.10) of a second
• Automated touch screen PLC eliminates historic timing issue that cause die-hole freeze off
• Eliminates polymer overflow in the water chamber, or inlet/outlet piping
• All CROWN Machine Diverters are sized for full flow at maximum rate