Dry Face Pelletizer
- Output ranges from (2.2 lb/hr or 1 kg/hr) to (60,000 lb/hr or 30,000 kg/hr)
- Pellet sizes from Large (.060 - .250" or 1.2 - 10mm) to Small Micro (.010 - .050" or .25 - 1.1mm) depending on die, pelletizer model and resin
- Suitable for high output processing, compounding, manufacture of color concentrate, scrap recovery, pilot operation, and research and development
- Able to process a wide range of polymers such as hot melt adhesives, thermoplastic rubber, polyester, nylon and other thermoplastics; especially for TPE, TPU, PA, PET, TPV, ABS, PP, PVC, Wax, Adhesives, Glass filled material, Carbon fiber filled compounds and 95% Metal filled compounds
- The pellet plate is designed for electric heating, which provides for uniform heating of all holes in the plate
- Cutting chamber utilizes contoured internal passages
- Air flows around the cutter blades and the pellet plate in such a manner as to ensure rapid and uniform removal of the pellets from the cutting area, which includes six mounts for spray with compressed air
- Dual function stainless steel spray heads to control mist and volume of spray on product
- Blower of air tempering systems uses bronze wetted parts or stainless steel
- Ball valve for the cooling valve to the spray heads handles cooling water rate at a total pressure drop not to exceed 3 PSIG
- In-line filters to enable continuous operation during clean out. All wetted parts are stainless steel
- Hydraulic polymer diverter valve provides for easy start up for upstream equipment by controlling when polymer flows to the die plate
- Hydraulic system of the diverter valve bolt moves from start-up position to production position in less than 1 second.
|